Hallow Eve

"Hallow Eve"

Artwork by Kieth Garvey

Scrap Kit by Pimp'd Designz, "Boo-tiful" which is an

exclusive at Totally Sweet Designz.

Font of choice, I used "Mad Beef"

Graphic Program of choice, I use PSP X2

Let's Begin!

1. Open all of your supplies into PSP.

2. Create a new transparent image. I always start out with a 800x800

square image, just so I know I have enough room.

3. C/P the star frame from the kit. Resize as needed.

I resized mine at 60%.

Rotate slightly to the left.

Sharpen image.

Add drop shadow.

Create a new raster layer behind the frame layer.

2. Using your lasso tool, trace along the frame edge.

C/P the paper of choice into selection on the new raster

layer you created behind the frame.

Add drop shadow to the frame layer.

3. Choose a paper of your choice for the "circle".

Your circle size depends on your initial tag size.

You can resize this at anytime. 

Using your selection tool, circle, trace out a circle shape.

Go to Layers>Promote Background layer

Crop to selection.

Open a new raster image.

Flood fill white.

C/P the newly created circle onto the white filled image

as a new selection.

Go to Selection>modify>expand>4

Crop to selection.

C/P the circle behind the frame/paper layers.

Add drop shadow.

Repeat this step for the rounded rectangle.

*I didn't add a white border around mine, but you can if you wish.

4. C/P the tube of choice above all layers.

Resize as needed.

Add drop shadow.

Using your close up tube (if available), C/P the 

close up image above the paper layer within the frame

Re-Size as needed and trim around the frame so there isn't

anything hanging out.

I chose to make mine B&W.

5. C/P the spiderweb from the kit above the tube layer inside

the frame. 

Resize and trim as needed.

Add drop shadow.

C/P the crow from the kit above the frame layer.

Resize as needed.

Add drop shadow.

C/P the glitter splatter of choice behind all layers.

Resize as needed and place behind the star frame area

or where you'd like.

Add name and copyright info and your done!

This tutorial was written on October 1st, 2013 at 9:35 AM by Pimp'd Designz

Skulltastic

"Skulltastic"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "U Rock My Heart" by Skulliez Scrapz

Font of choice, I used Waza LT Pro

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the frame as a new layer

Rotate using your "pick tool" to desired angle

Add drop shadow

Create a new raster layer behind the frame layer

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the hearts of choice above the frame layer

Add drop shadow

C/P the heart pin at the top edge of the frame or wherever

C/P the skull from the kit above the little tag layer 

Add drop shadow

Re-size as needed

C/P the tube of choice above the frame layer

Trim as needed

Add drop shadow

Add copyright info and name and your done!

This tutorial was written on 01/14/2012 at 6:45PM by Pimp'd Designz

Cool Tech

"Cool Tech"

What you need :

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Techie Dreams" by Skulliez Scrapz

Font of choice, I used ill.skillz

Graphic Program of choice, I use PSPx2

Let's Begin!

1. Open a new image

Open all of your supplies

2. C/P the frame of choice

Add drop shadow

Create a new raster layer behind the frame layer

Using you selection tool, rectangle, and trace along the open area of the frame

C/P the paper of choice inside selection

C/P the tube of choice above the frame layer

Re-Size and trim as needed

Add drop shadow

C/P the MP3 player from the kit above all layers

Using your "pick tool", rotate to desired angle

Add drop shadow

C/P the head phones from the kit

Re-Size and add drop shadow

C/P a close up/head shot of a tube of choice above the MP3 player screen

Trim as needed

Lower opacity 

C/P the wired wrap above all layers

Re-Size as needed

Add drop shadow

Add copyright info and name and your done!

This tutorial was written on 01/14/2012 at 3:10PM by Pimp'd Designz

Cowgirl

"Cowgirl"

What you need:

Tube of choice, I used artwork by Keith Garvey

(This is an older tube that may or may not be available at PTE)

Scrap Kit, "Rhinestone Cowgirl" by Skulliez Scrapz

Font of choice, I used Saginaw

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the frame of choice as a new layer

Add drop shadow

Create a new raster layer behind the frame layer

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection behind the frame layer

C/P the tube of choice above all layers

C/P the close up of choice above the paper layer

Trim or re-size as needed

Mirror image if you wish

Lower opacity of the image

C/P the flowers of choice above all layer

Add drop shadows to each

Arrange as you'd like

C/P the gems above the flowers of choice

Re-size as needed

Add drop shadow to each

C/P the belt buckle from the kit behind all flower layers

Add drop shadow

Rotate using your "pick tool"

C/P the wanted poster behind the buckle layer

Rotate as desired with your "pick tool"

Add copyright info and name and your done!

This tutorial was written on 01/14/2012 at 1:55 PM by Pimp'd Designz

Fallen Angel

"Fallen Angel"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Sinners" by Me, available HERE

Font of choice, I used TXT Sloppy Script

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. Open a paper of choice for the strip

Using your selection tool,rectangle, trace out a long rectangle shape

Crop to selection

Add drop shadow

Choose a second paper to create a small circle frame

Using your selection tool, circle, trace out a medium sized circle

Crop to selection

Using your magic wand tool, click the circle

Then go to selection>modify>contract>12

Cut selection

C/P the newly created frame above the paper strip 

Add drop shadow

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the broken glass element above the paper layer

Re-Size as needed

Duplicate and place in another area of the frame

3. C/P the column from the kit

Re-Size as needed

Add drop shadow

Duplicate and place on the other side of the frame

C/P the moon from the kit above the paper strip layer

C/P the tube of choice above all layers

Re-Size as needed

Add drop shadow

C/P the smoke from the kit

Duplicate and rotate using your "pick tool"

C/P the winged hearts from the kit

Re-Size as needed

Add your name and copyright info and your done!

This tutorial was written on 01-11-2012 at 11:45 by Pimp'd Designz

PSP Nerd

"PSP Nerd"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "I {heart} Nerds" by Me HERE

Font of choice, I used TXT Annesia

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the frame choice from the kit

Re-Size 50% and rotate using your "Pick tool"

Add drop shadow

Repeat this, without rotating the second frame

Create a new raster layer behind all frame layers

Using your lasso tool, trace along each frame layer

C/P the papers of choice into each frame selection

3. C/P the computer from the kit

Re-Size as needed

Using your magic wand, select the monitor area of the PC

Take a Screen Shot of PSP using your "Print Scrn" button on the PC

C/P the screen shot into selection

C/P the cord from the kit behind the PC layer

Add drop shadow

C/P the camera from the kit above the frame layers

Re-Size as needed

Add drop shadow

Rotate using your "pick tool"

C/P the mesh of choice behind all layers

C/P the tube of choice above all layers

C/P the "I love nerds" word art of choice from the kit above the PC layer

Add "PSP" in the heart

Add copyright info and name and your done!

This tutorial was written on 01-11-2012 at 11:30 AM by Pimp'd Deisgnz

Hard Rock Princess

"Hard Rock Princess"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "DRMR GRL" By me, Available HERE

Script Font Of Choice

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the frame of choice

Add drop shadow

Using lasso tool, trace along the open area of the frame

Create a new raster layer behind the frame layer

C/P the paper of choice into the selection

C/P the tube of choice above all layers

Duplicate and drag one layer behind the frame layer

Trim the bottom area of the tube as needed

Add drop shadow to the bottom layer tube

3. C/P the flame overlay from the kit behind all layers

Duplicate and place around the tag area

C/P the swirled music note element above the flame overlay layers

C/P the word art from the kit

*I trimmed off the crown

C/P the skull of choice above the WA layer

Re-Size drastically and place as shown or how you wish

Add copyright info and name and your done! 

This tutorial was written on 01-11-2012 at 11:20 AM by Pimp'd Desigz

Born To Ride

"Born To Ride"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Outlaw" by Me available HERE

Script Font of choice

Graphic Program of Choice, I use PSPX2

Let's Begin!

1. Create a new transparent image

Open all of your supplies

2. C/P the city scape 

Add drop shadow

Re-Size 80%

C/P the frame of choice

Re-Size as needed

Add drop shadow

C/P the fence from the kit

Re-Size as needed

Add drop shadow

Create a new raster layer behind the frame layer

Using your selection tool, circle, trace out around the open area of the frame

C/P the paper of choice into selection

C/P the tube of choice above all layers

Add drop shadow

C/P the word art from the kit

Add drop shadow

Add copyright info and name and your done!

This tutorial was written on 01-11-2012 at 11:15 AM by Pimp'd Designz

Lavender Beauty

"Lavender Beauty"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Femme Fatale" by Designs By Sarah

Font of choice, I used Moody Boys

Graphic Program of Choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the circle frame of choice

Re-Size as needed

Add drop shadow

Add a new layer behind the frame layer

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the purple leaves behind the paper layer

Add drop shadow

Trim off stem

C/P the ivy stamp behind all layers

C/P the swag from the kit above the frame layer

Add drop shadow

Re-Size as needed

C/P the purple flower cluster above the frame layer

Add drop shadow

C/P the shatter glass overlay above the paper layer

Trim as needed

Add copyright info and name and your done!

This tutorial was written on 12-28-2011 at 3:30 PM by Pimp'd Tagz

Happy New Year

"Happy New Year"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Happy New Year" by Designs by Sarah

Fonts of choice, I used Bonheur Royale and Bilbo

Graphic Program of Choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the black frame from the kit as a new layer

Add drop shadow

Create anew raster layer behind the frame layer

Using your selection tool, rectangle, trace along the open area of the frame

C/P the paper of choice inside selection

C/P the clock from the kit above the frame layer

Re-Size as needed

Add drop shadow

C/P the close up tube of choice above the clock layer

Trim as needed

Using the layer menu, choose the "Hard Light" blend option

C/P the full body tube above all layers

3. C/P the confetti from the kit behind all layers

Rotate as needed

Duplicate and mirror

C/P the swirl of choice from the kit

Add drop shadow 

Add any wording and name and your done!

This tutorial was written on December 10th 2011 at 12:10 PM by Pimp'd Designz

Holiday Planning

"Holiday Planning"

What you need:

Tubes of choice, I used artwork by Keith Garvey

Scrap Kit, "Christmas Traditions" by Designs by Sarah

Mask of choice, I used BYOK : Big Chill PU Masks by Me

Font of choice, I used VS Expectation LT Std

Graphic Program of choice, I use PSPX2

Animation Shop

Eye Candy 5 Nature : Fire

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the mask of choice on to a paper of choice

Promote background layer and crop to selection

C/P onto your transparent image

C/P the fireplace from the kit

Re-Size as needed

Add drop shadow

C/P the garland of choice above the fireplace

Re-Size as needed

Add drop shadow

C/P the santa bag from the kit above the tree layer

Re-Size as needed and add drop shadow

C/P the horizontal frame of choice from the kit

Re-Size as needed

Add drop shadow

Create a new raster layer behind the frame layer

2. C/P the "heads" of 4 tubes of the artist of choice

Trim and re-size as needed

C/P the main tube of choice above all layers

Add drop shadow

***************************

We will now begin the animation process. Add copyright info and name now.

3. Create a new raster layer above the fireplace layer

Using your lasso tool, drag out a small line in the fireplace where you want to start your fire.

Go to EyeCandy 5>Nature>Fire

I used these settings :

Column Length : 98.12

Flame Width : 30

Waver : 100

Flame Intensity : 95

Soften Edges : 50

Make sure the "Start From Bottom" box is checked

If your happy with the results, save as frame 1 or however you'd like

4. Click "Undo" once and repeat, simply hit "Random Speed" each time you make a new frame.

You should make 3-6 frames total

Once completed, you are ready to add them to your animation shop wizard.

5. Open Animation shop and click "Animation Wizard"

Open all of your frames in the wizard

Press Play

I used frame speed 25

If you are happy with the results, save and your done!

This tutorial was written on 11/13/11 at 4:45 PM by Pimp'd Tagz

Forgotten Princess

"Forgotten Princess"

What you need:

Tube of choice, I am using artwork by Keith Garvey

Scrap Kit, I used "FiFi" from Designs by Sarah

Font of choice, I used TheNautiGal

Graphic program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. Open the paper of choice from the kit.

C/P the close-up of the tube you plan to use

Add drop shadow

Merge the 2 layers together

Using your selection tool, circle, trace along the paper/tube

until you have a nice size circle

Promote background layer and crop to selection

C/P the circle to the transparent image

Rotate slightly using your pick tool

Add drop shadow

C/P the flora circle print from the kit over the paper/tube circle

C/P the brick wall behind the paper layer

Add drop shadow

C/P the lace from the kit above the brick layer

C/P the greenery from the kit above the lace layer

Duplicate and place above all layers

Mirror the top greenery.

Add drop shadow

C/P the crown from the kit above all layers

Re-Size as needed

Rotate slighty

Add drop shadow

Add copyright info and name and your done!

This tutorial was written on November 12, 2011 at 12:30 PM by Pimp'd Tagz

Heart Breaker

"Heart Breaker"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Play List Collab : Break Your Heart" by TammyKat Dezigns

Font of choice, I used Rat Infested Mailbox

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the frame of choice from the kit

Rotate 90 degrees to the right

Create a new raster layer behind the frame layer

Using your selection tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the hearts of choice from the kit above the frame layer

C/P the tube of choice above the paper layer

I made my tube B&W to match the tag

Add drop shadow

Trim as needed

Add copyright info and name and your done!

This tutorial was written on October 16th, 2011 at 11:20 AM by Pimp'd Designz

Fly With The Witch

"Fly With The Witch"

What You Need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "Haunted" by Designs by Sarah

Fonts of choice, I used BeauRivageTwo and Atman

Poem of choice, I used one found here

Graphic Program of Choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. Open the first paper of choice for the large frame

Crop to a large rectangle size

Promote background layer

Select all, and go to selection>modify>contract>16

Cut the selection

Open another transparent image and flood fill white

C/P the frame as a new selection

Go to selection>modify>expand>6

Crop to selection

You should now have a paper frame with a white trim

Now create a new raster layer above the frame layer

Using your selection tool, rectangle, create a smaller rectangle shape for the smaller frame

Flood fill white

Select the rectangle layer and repeat the same steps above for the large frame

You should now have 2 frames

3. Using your selection tool, rectangle, trace along the open area of the large frame

Create a new raster layer behind the large frame layer

C/P the paper of choice into selection

Repeat this step for the small frame
C/P the lace skull from the kit

Duplicate and place at the ends of the frame

Add drop shadows

C/P the barb wire from the kit

Add drop shadow

C/P the tube of choice and trim as needed

I made my tube B&W to match the theme of the tag

C/P the bow of choice above the small frame layer

Add drop shadow

Add any wording, name and copyright info and your done!

This tutorial was written on October 16th, 2011 at 10:55 AM by Pimp'd Designz

Cherry Pie

 

"Cherry Pie"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit by me, "Kiss the Cook"

Font of choice, I used Saginaw

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the frame of choice from the kit

Rotate 8 degrees to the left

Add drop shadow

Create a new raster layer behind the frame layer

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the oven from the kit above the frame layer

Apply drop shadow

C/P any other elements of choice, I used the following:

Pie, Spatula, book, rolling pin, pot holder and cherry

Add drop shadow to each element used

C/P the tube of choice

Add drop shadow

Add any copyright info and name and your done!!!

This tutorial was written on July 15th, 2011 at 12:30PM by Pimp'd Designz

Glam Princess

"Glam Princess"

What you need : 

Tube of choice, I used artwork by Keith Garvey

Scrap kit by me, "Glam Princess" found at PMTW/S

Font of choice, I used Stuccato

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2.  C/P the first frame of choice and rotate 12 degrees to the right

Create a new raster layer behind the frame layer

Add drop shadow

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the credit card from the kit above the frame layer

Rotate 12 degrees to the left

Add drop shadow

Re-Size as needed

C/P the diamond circle frame above the Credit Card layer

Re-size as needed and add drop shadow

Create a new raster layer behind this frame as well

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the close up of the tube you are using 

Trim as needed and apply drop shadow

I chose to make mine B&W

C/P the diamond element of choice above the top frame layer

Re-Size as needed and add drop shadow

C/P the tube of choice above the top frame layer

Add drop shadow

C/P the handbag from the kit above the tube layer

Re-Size as needed and apply drop shadow

C/P the eiffel tower element from the kit behind the purse layer

Re-Size as needed and add drop shadow

C/P the flower of choice above the purse layer

Add drop shadow and re-size if needed

C/P the tiara above the top frame layer and rotate 12 degrees to the right

Re-Size and apply drop shadow

You may need to sharpen the tiara using image adjustments

Add your copyright info and name and your done!

This tutorial was written on July 12th, 2011 at 10:50 AM by Pimp'd Tagz

Miss America

"Miss America"

What you need :

Artwork of choice, I am using artwork by Keith Garvey

Scrap kits of choice, I used "Miss Independent Collab"by 4 of the designers at PMTW/S

Font of choices, I used Staccuto

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the star printed as a new layer

C/P a frame of choice as a new layer, rotate 12 degrees to the left, add drop shadow

Create a new raster layer behind the frame layer

Using your lasso tool, trace along the open area of the frame

C/P the paper of choice into selection

C/P the tube of choice above the frame layer

Duplicate and drag one layer behind the frame layer

Trim the top layer so it appears to be "popping" out of the frame

Now trim any areas of the bottom layer tube so nothing sticks out

C/P the star element of choice Rotate 10 degrees to the right

Add drop shadow

C/P the firework of choice above the star element

Add drop shadow

Add copyright info and name and your done!

This tutorial was written on July 12, 2011 at 10:25 AM by Pimp'd Tagz

WANTED

"WANTED"

What you need:

Tube of choice, I used artwork by Keith Garvey

Scrap Kit, "It's Criminal" by TammyKat Dezigns

Font of choice, I used Staccato222 BT

Graphic Program of choice, I use PSPX2

Animation Shop

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. C/P the chained frame as shown as a new layer on the transparent image

Add drop shadow

Create a new raster layer behind the frame layer

Using your selection tool, Rectangle, Trace along the open area of the frame

C/P the paper of choice into the selection

C/P the word art of choice above the frame layer

C/P the tube of choice above the frame layer

C/P a close-up or second image above the paper layer

*I made mine B&W*

Add any other elements of choice, I decided to make this one simple.

**Starting Animation Frames, Please Add name & copyright info now**

3. C/P the bar element from the kit

Trim as needed

Duplicate the bars until you have 4 layers of bars

"Hide" the top 3 layers

Move the bars over to the left side of the open frame area

Un-hide the 2nd bar layer above the first

Move over slightly further, keeping the bars lined up on all sides

Repeat this process for the other 2 bar layers, until you have the final bar layer all the way accross

4. "Hide" all the bar layers

Save the tag as "frame1" or however you want

Un-Hide the bottom bar layer

Save as Frame 2

Hide that layer and show the second layer

Save as frame 3

Repeat this until you have a total of 5 frames and the final bar layer is visible

Open Animation Shop

5. Open your 5 frames inside the animation wizard

Press play

If your frame speed is set at default, it should be "15"

For this animation, that's a bit fast

I have mine changed to 55 for a slower animation

But you can find the speed you like the best

Once your speed is selected, Press play and if your happy, Save and your done!

This tutorial was written on 5/7/2011 at 4:05 PM by Pimp'd Tagz

Into The Night

"Into the Night"

What you need:

Tube of choice, I used artwork by Keith Garvery

Scrap kit of choice, I used "Into the Night" Collab by Designs by Sarah & PolkaDot Chassity

Font of choice, I used Satisfaction

Graphic Program of choice, I use PSPX2

Animation Shop

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. Choose a paper of choice and Promote background layer

Using your selection tool>circle, trace out a large enough circle to work with

Flood Fill the transparent image with white

C/P the paper circle as a new selection on the white image

Go to selection>modify>expand>8

Crop to selection

Open another transparent image

C/P the circle as a new layer

Add drop shadow

With the swirly frame opened in PSP, C/P the frame onto the white flood filled

image, and repeat the same steps as the circle, change the # to 3 instead of 8

C/P above the circle

Add drop shadow

Using your selection tool>rectangle, trace along the open area of the frame

Select the circle layer

Cut selection

Create a new raster layer behind the paper circle

C/P the paper of choice into selection

3. C/P the tube of choice above all layers

C/P a flower of choice

Add drop shadow

C/P the tree from the kits

Trim as needed

Add drop shadow

C/P the moon

Re-Size as needed

Add drop shadow

****************

Starting Animation

*********************

4. Add your copyright info and name now

Go to Adjust>Brightness/Contrast

Select the paper layer inside the frame

Play with the settings until you have darkened the paper inside the frame

*This works best if it's white*

Save as frame 1 or however you'd like

Hit the undo arrow and save the original as frame 2 or whatever

5. Open the images into the animation wizard

Choose a speed, I picked 15

Press play and if your happy, save and your done!

This tutorial was written on April 30th, 2011 at 3:11 AM by Pimp'd tagz

You Make Me Feel

"You Make Me Feel"

What you need:

Tubes of choice, I used artwork by Keith Garvey

Scrap Kit, "Like a Virgin" by Designs By Sarah & TammyKat Designz

*Free w/ ANY purchase until 2.22.11*

Font of choice, I used "Toonish" for template and Send Flowers for names

Graphic Program of choice, I use PSPX2

Let's Begin!

1. Open a new transparent image

Open all of your supplies

2. Open a paper of choice

Type "You Make Me Feel Like" using font of choice over paper

Cut Wording and then re-paste as a new selection on paper

Promote background layer and crop to selection

Open another transparent image and flood fill white

C/P as a new selection, the paper text

Go to selections>modify>expand>4

Crop to selection

C/P to your original transparent image

Add drop shadow

Create a new raster layer above the text layer

Create a square shape using your selection tool>square

Flood fill the selection white

Go to modify>contract>4

Cut selection

Rotate 5 degrees to the left

Add drop shadow

Duplicate & Mirror and place on the other side of the tag

C/P the glitter spray behind the wording

C/P the flower spray above the wording

Re-Size as needed

Add drop shadow

C/P the silver ball behind the text layer

Cut the chain off the ball using your lasso tool

Re-Size as needed

Add drop shadow

3. Create a new raster layer behind the mini frame layers you created

Using your lasso tool, trace along each open area of the frames

C/P the paper of choice into selection

C/P the tubes of choice

Add drop shadows

Add "A Virgin" to the tag and place how you wish

Add name and copyright info and your done!

This tutorial was written 2.20.11 at 1:40 PM by Pimp'd Tagz